Preslav 83, BG-9700 Shoumen
0888 626 935; 
stdimpex@stdimpex.comJOG for suspended toilet bowl
concealed flushing cisterns for suspended toilet bowl, with frontal activation
ident 15612
art. 5-380-300
Prefabricated build-in element for in-wall toilet cistern, frontal activation, toilet cistern depth 120mm, installation height 1055mm. Intended for pre-wall or in-wall massive installation. Toilet cistern can be built in from the minimum of 20 mm to the maximum of 80 mm of depth
- galvanised metal U profile
- pre-installed toilet cistern with dual flush technique. If the START – STOP button is installed works with single flush START – STOP technique.
- Big quantity: 6 or 9 l, factory default setting 9 l
- Small quantity: 3 – 4.5 l
- moisture insulation with styrofoam pad installed in toilet cistern
- two threaded rods with M 12 nuts for fixing toilet with axial distance of 180 or 230 mm
- build-in protection for box culvert
- extension Ø 45/40 × 190 mm and discharge hoses Ø 90 × 165 mm
- Ø 90 mm collar sets
- fixing material
- pre-installed angle valve 1/2'' on the right side of the lid
- without flushing plates
- factory default settings of toilet cistern is 9 l and is changed only with regulation of discharge valve for big quantity 6 or 9l, small quantity 3-4,5l is not regulated.
- fill valve must remain at factory default setting!
