Preslav 83, BG-9700 Shoumen
0888 626 935; 
stdimpex@stdimpex.com» Sanitary equipment» Flushing cisterns» Concealed flushing cisterns» Tornado/Isosan Duo for suspended toilet
Tornado/Isosan Duo for suspended toilet
Build-in toilet cistern Tornado/Isosan for suspended toilet, with frontal activation
ident 12602
art. 5-380-200
Prefabricated build-in element Tornado/Isosan for wall toilet bowl, frontal activation, toilet cistern width 120mm, build-in height 1055mm. Toilet cistern can be build in from the minimum of 15mm to the maximum of 80mm of depth
- galvanised metal U profile
- pre-installed toilet cistern with dual flush technique. If the START – STOP button is installed works with single flush START – STOP technique
- *Big quantity: 6 or 9 l, factory default setting 9 l
- *Small quantity: 3 – 4.5 l
- moisture insulation with styrofoam pads installed in toilet cistern
- two threaded rods with M 12 nuts for fixing toilet with axial distance of 180 or 230 mm
- styrofoam protection for box culvert
- PE wall discharge elbow Ø90/110 mm
- extension Ø45/40×190mm and discharge hoses Ø90×165mm
- collar sets
- fixing material
- pre-installed angle valve 1/2'' on the right side of the lid
- element does not have flushing plates
- factory default settings of toilet cistern is 9 l and is changed only with regulation of discharge valve for big quantity 6 or 9l, small quantity 3-4,5l is not regulated
- fill valve must remain at factory default setting!
Flushing plates suitable for single or dual flushing START-STOP technique:
- Art. 5-380-040
- Art. 5-380-220
- Art. 5-380-210
